Suhr A.C.E.
The A.C.E. (Analog Cabinet Emulator) is an active analog cabinet emulator designed to offer guitarists a portable and convenient way to capture the complex characteristics of a guitar speaker cabinet for a variety of recording (silent* or in a studio) and live performance applications without the use of a microphone.
Controls:
INPUT:
This control functions only when using the From Amp input. It is used to set the volume of your amp signal before it goes through the filter. *This control can be set as desired as long as the Clip light does not turn on. If it does, turn the Input knob counter clockwise to prevent the filter from clipping.
SUB:
This control reduces or increases the amount of low frequency bass of the output
HIGHS:
This control reduces or increases the amount of middle and high frequencies of the output
PRESENCE:
This control reduces or increases the amount of presence fre- quencies of the output
LIFT GROUND (XLR):
This switch lifts the ground on the XLR output when flipped to the up position.
BYPASS/ACTIVE:
When set to Bypass, the filter is bypassed and the output is an unfiltered line level signal. When set to Active, the filter is engaged as in normal operation.
PHASE (XLR):
This switch flips the phase of the Balanced output (XLR) when flipped to the up position.
Specifications:
Input Impedance: 100 KOhm
Output Impedance: 600 Ohm
Power Connector: 9Vdc, center negative, 2.1mm x 5.5mm
Operating voltage: 9Vdc, regulated
Maximum Voltage: 10Vdc
Reverse Battery Protection: Yes
Over Voltage Protection: Yes
Current Consumption: 80mA
Estimated Battery Life: 4.5 hours continuous use
Dimensions: 4.875”(W) x 3.875”(D) x 1.375”(H)
Weight: 1.05 lbs
ROHS Compliant: Yes
