Kiko Loureiro Singature Shiba Drive Reloaded
Kiko primarily uses his Shiba Drive as a boost to push the front-end of his amplifiers for increased sustain and harmonics. Based on feedback from Kiko we have modified the Shiba Re|Loaded circuit to offer greater clarity and low-end response while retaining the character and dynamics of the original.
Additional Features:
Trye Bypass:
Shiba Drive Reloaded is true bypass via a relay. This function allows for the remote switching, and the battery monitor feature. The relay produces less popping when switching the pedal on and off.
FX Link:
The FX Link connector allows the pedal’s switching function to be controlled from an external switch, pedal board, loop switcher, or any other custom interface. FX Link also provides the ability to power up in the On/Off state.
Low Battery Monitor:
Shiba incorporates a unique battery monitor that alerts the user to low battery conditions. In addition, the battery monitor will automatically switch the pedal to True Bypass if the battery voltage is too low for the circuitry to correctly operate.
Техничиские характеристики:
SKU: 03-SHI-0003
OUTPUT IMPEDANCE: 600 ohm
POWER CONNECTOR: 9Vdc, center negative, 2.1mm x 5.5mm
OPERATING VOLTAGE: 4V to 18V (nominal 9V)
MAXIMUM VOLTAGE: 20Vdc
REVERSE BATTERY PROTECTION: Yes
OVER VOLTAGE PROTECTION: Yes
CURRENT CONSUMPTION: 8mA
ESTIMATED BATTERY LIFE: 75 – 100 hours of continuous use
DIMENSIONS: 2.5”(W) x 4.5”(D) x 1.25”(H)
WEIGHT: 0.75lb
FX LINK CONNECTOR: 1/8" Mono
FX LINK MAX VOLTAGE: 3.3Vdc
SHIELD → TIP: Activate Pedal
ROHS COMPLIANT: Yes
AGENCY APPROVALS: N/A